Loading... Please wait...
  Loading... Please wait...

4 Stage Reverse Osmosis System

  • Image 1
  • Stellar Water Filter Faucet
  • Deluxe Long Reach Water Filter Faucet
  • High Loop
  • Antique
  • Fin
  • Petite
  • Black Petite
  • Three Way Water Filter Tap L Model
  • 3 Way Stainless Tap Petite

Choose Options Buy Extra Cartridges and Save

Product Reviews

 Four Stage Undersink Reverse Osmosis System 1300 001 752

icon-30-day-money-back.jpgfree-shipping.jpg               watermark.jpg
This reverse osmosis system is made from housings and cartridges sourced from the USA, it is hand built in Australia by qualified plumbers, the housings used in this system are Water Mark level 1 approved, this is the standard that is used as a bench mark by all plumbers in Australia for quality and reliability. All components are Australian Standards Approved. Comes with Water Mark approved pressure limiting valve as standard.
Robust USA system, this system comes with a choice of 2 ceramic disc designer water filter taps from our range, can be upgraded to three way water filter tap which will replace your exisiting flick mixer, no need to drill an extra hole in your benchtop! We install reverse osmosis fluoride removal systems in Sydney Canberra and all areas in between.
What else comes with the system?
2 x 10" QMP housings with STAINLESS STEEL mounting bracket (assembled)
1 x Reverse Osmosis housing with 190 Litres a day Genuine Dow Filmtec Membrane TFC 
1 x Carbon inline post filter Omnipure 
2 x 1/4" speed fit connectors 
1 x 550 kpa Pressure limiting/check valve 
1 x mains water connection tee to suit your plumbing (choice of 3)
1 x Housing Spanner
10 x 1 Micron Sediment Cartridge
1 x 5 micron Chlorine removal cartridge  
8 Metres of Tubing 
1 x Stainless Steel Holding Tank 12 Litres
Full installation instructions
If you need any help with your selection please give one of our water filtration experts a call on 1300 001 752
Choose from any of the three options below, option one will suit if you have a half inch flexible hooker feeding your kitchen tap, option two will fit on a 3/4" thread such as the connection feeding your dishwasher (please ensure that dishwasher is fed from cold water supply), option three will be suitable if you have a 1/2" copper pipe feding your kitchen tap. Click on any of the images below to view instructions on how to fit.
Robust Australian Standards 3497 WaterMark Level 1 approved housings which means that they have been tested to 700 KPA of water pressure over 100,000 times without failure, highest quality housings.

All products designed for plumbing and drainage purposes in Australia must comply with the requirements set out by the Plumbing Regulators.
The objective of the WaterMark Certification Scheme is to provide a uniform national approach to plumbing product approvals. Under the Scheme,
provided that your product carries the WaterMark, it will be accepted for use in all Australian states and territories - subject to correct installation practices in accordance with AS/NZS 3500 and any local deviations.


How to install a 3/4" dishwasher adaptor for water filter

Technical Data Sheets

Write your own product review

This product hasn't received any reviews yet. Be the first to review this product!